Search
T7 Oil Fired Hot Water Boiler

T7 Oil Fired Hot Water Boiler

T6 Vacuum Hot Water Boiler

Product parameters:

Rated thermal power: 2.8-7.0Mw

Rated thermal efficiency: ≥105.5%

Pressure: -0.02MPa

Available fuel: natural gas

Product description:

The deep matched technology of new combustion and heat transfer no longer sacrifices the boiler’s key characteristics (heat transfer system) to adapt to the burner characteristics (combustion system), making the gas boiler a complete thermal system with low nitrogen emissions. At the same time of obtaining low nitrogen emission, the utilization efficiency of the boiler is further improved.

Product advantages:

Intelligent modular system

The boiler has single, series and parallel use modes, and the system can automatically adjust the number and status of boiler operation.

All-terrain applicability

The use space of the furnace is increased, and it can be used normally under the conditions of high cold, high altitude or high temperature.

The floor space is very small

Using the wing condensing technology, the overall area of the boiler is greatly reduced while ensuring the efficiency of the change.

Simple operation

The boiler is equipped with a high-color touch screen, dynamic graphic display, multi-level menus and permissions, and automatic fault record keeping.

T7 Oil Fired Hot Water Boiler Anatomy

T7 Gas Fired Vacuum Hot Water Boiler Anatomy
T6 Oil Fired Hot Water Boiler

T6 Oil Fired Hot Water Boiler

T6 Vacuum Hot Water Boiler

Product parameters:

Rated thermal power: 0.7-2.8Mw

Rated thermal efficiency: 105.5%

Pressure: -0.02MPa

Available fuel: natural gas

Product description:

The boiler adopts an environmentally friendly combustion method – full premixed combustion, and the gas and air are precisely adjusted and premixed in advance to ensure more complete combustion. The new crossing wing-shaped heat exchange element, Ultra-speed Smoke Cooking Tube, uses a unique heat transfer technology and structural design to achieve deep condensation of flue gas and greatly improve heat transfer efficiency.

Product advantages:

Small footprint

The heat exchange surface of the boiler is sufficient, and the condenser and the rear smoke box are integrated to reduce the total volume of the boiler.

High efficiency

The flow rate of the flue gas in each section is stable, and the utilization rate of the heat exchange surface is improved.

A multi-purpose machine

The boiler adopts standard pipe box, adapts to single and double circuit, different temperature and other modes, and realizes multi-channel water supply.

Long service life

The heat medium in the boiler is deoxidized and descaled, and there will never be scaling and corrosion. The normal service life can reach more than 20 years.

T6 Oil Fired Hot Water Boiler Anatomy

T6 Gas Fired Vacuum Hot Water Boiler Anatomy
H6 Oil Fired Hot Water Boiler

H6 Oil Fired Hot Water Boiler

H6 Gas Fired Hot Water Boiler

Product parameters:

Rated thermal power: 0.7-2.8Mw

Rated thermal efficiency: 97.2-106%

Pressure: 0.1MPa

Available fuel: natural gas

Product description:

The boiler adopts advanced full premixed combustion technology to achieve super high utilization of fuel, and the operating efficiency is increased by more than 15% compared with ordinary boilers. The integrated structure design reduces the floor space by more than 30%. It is the preferred equipment for energy-saving heating in hotels, shopping malls and schools.

Product advantages:

Ultra high heat transfer efficiency

The winged heat exchange element, the unique tear groove design increases the heat exchange area by 5 times, and the heat transfer efficiency is superior.

Very simple installation

Boiler installation design, in-plant commissioning, user site only need to install in and out of water pipes, chimneys, gas pipes and power, you can use.

Compact structure and small size

By optimizing and improving the boiler and burner structure, the boiler body is greatly reduced to only 40% of the volume of an ordinary hot water boiler.

Ultra low nitrogen emissions

Effective control of pollutant emissions through the use of full premixed combustion technology and condensate at the end of the boiler.

H6 Oil Fired Hot Water Boiler Anatomy

H6 Gas Fired Hot Water Boiler Anatomy
Oil Fired Water Tube Steam Boiler

Oil Fired Water Tube Steam Boiler

Gas(oil) Fired Water Tube Steam Boiler

Product parameters:

Rated thermal power: ≥10t/h

Rated thermal efficiency: 100-104%

Pressure: ≤2.5MPa

Available fuel: diesel, heavy oil, natural gas, city gas, liquefied petroleum gas, etc.

Product description:

The boiler adopts a double-drum longitudinal “D” type arrangement structure; water, steam or steam-water mixture flows in the pipe; flame burns and flue gas flows outside the pipe, forming extremely fast steam-water flow rate and excellent water circulation system. Boiler heat absorption rate and thermal efficiency are high.

Product advantages:

The boiler quality is good

More than 95% of automatic welding equipment is used. Each boiler is tested and quenched before leaving the factory. The qualified rate of inspection is 100%.

Meet large evaporation requirements

The furnace is placed outside the cylinder, and the volume of the furnace can be large or small to meet the requirements of combustion and large evaporation.

Efficient heat transfer

The drum is not directly heated, and the tube containing the water vapor is placed in the furnace and the flue as a heating surface to improve heat transfer efficiency.

Small impact of the disaster

The special water pipe arrangement increases the heating surface, but the amount of boiler water is not much. In the event of a disaster, the degree of damage is small.

Oil Fired Water Tube Steam Boiler Anatomy

Gas(oil) Fired Water Tube Steam Boiler Anatomy
Oil Fired Split Steam Boiler

Oil Fired Split Steam Boiler

Gas(oil) Fired Split Steam Boiler

Product parameters:

Rated thermal power: 1-20t/h

Rated thermal efficiency: 97-100%

Pressure: ≤3.82MPa

Available fuel: diesel, heavy oil, natural gas, city gas, etc.

Product description:

This series of boilers is designed with a classic shell type, full-wet back, down-flow and three-pass design structure. The fuel is fully burned in the large-capacity combustion chamber, and the combustion heat load is low, which can greatly reduce the emission of harmful substances such as CO and NOx.

Product advantages:

High efficiency and energy saving

Through the heat recovery device, the flue gas waste heat is reused, the exhaust gas temperature is as low as 95 ° C, the thermal efficiency can reach 97-100%, and the boiler efficiency is maximized.

The installation is simple

The boiler adopts an integrated design structure, and the user only needs to complete the construction and connection of water, smoke and gas pipelines.

Intelligent control system

The boiler is equipped with PLC intelligent control system, which can flexibly adjust the operating state of the boiler according to actual needs, realizing digital setting and automatic adjustment.

High product quality

More than 95% of the main welds of the boiler are automatically welded and molded at one time; the furnace body is fully tested for flaw detection, and the pass rate is over 99%.

Oil Fired Split Steam Boiler Anatomy

Gas(oil) Fired Split Steam Boiler Anatomy
Oil Fired Integrated Steam Boiler

Oil Fired Integrated Steam Boiler

pro 129

Product parameters:

Rated thermal power: 1-20t/h

Rated thermal efficiency: 100-104%

Pressure: ≤3.82MPa

Available fuel: heavy oil, diesel, natural gas, city gas, etc.

Product description:

The series of boilers adopts an excellent design concept. Through the condensing device, the heat of the flue gas is used in cascade, and the residual heat in the flue gas is fully absorbed, so that the boiler efficiency is greatly improved.

Product advantages:

High thermal efficiency

The flue gas is heat exchanged through the spiral finned tube in the condenser and economizer, so the heat transfer effect is stronger, the fuel consumption is reduced by at least 4%.

Long service life

The boiler body is made of a more corrosion-resistant material such as silicon-aluminum alloy. The combustion chamber is completely immersed in water and is not affected by high-temperature flue gas. So, the operating environment of the boiler is guaranteed.

The insulation measures are perfect

Ultra-fine glass wool is used as insulation material between the smoke box and the tube sheet, and the heat loss is extremely small, reducing unnecessary heat waste.

High safety factor

Various protection systems such as excessive water level, unstable pressure, abnormal power supply, scale detection, and burner system ensure the safety of boiler operation.

Oil Fired Integrated Steam Boiler Anatomy

Gas(oil) Fired Integrated Steam Boiler Anatomy
θrion Oil Fired Steam Boiler

θrion Oil Fired Steam Boiler

θrion Gas Fired Steam Boiler

Product parameters:

Rated thermal power: 1-20t/h

Rated thermal efficiency: 100-104%

Pressure: ≤1.6MPa

Available fuel: natural gas

Product description:

The closed condensate recovery system is combined with the three-pass structure, economizer and air preheater to fully utilize the heat of the gas or oil, and the heat of the high-temperature condensate is recovered from the source, which can save operating costs and improve boiler operating efficiency.

Product advantages:

Low operating costs

The closed condensate recovery system can recover more than 70% of condensed water, saving the overall operating cost of the boiler for the enterprise.

Deep matching

The combustion is deep matched to the heat exchanger, breaking the limits of the burner, and the boiler becomes a complete thermal energy system, further improving efficiency.

Small footprint

Using the crossing wine-shape heat transfer technology, the heat transfer area is increased by 5 times, saving 2/3 of the floor space compared with the ordinary boiler.

Modular system

Through parallel combination, multi-machine joint control can be completed, and up to 128 boilers can be controlled at the same time.

θrion Oil Fired Steam Boiler Anatomy

θrion Gas Fired Steam Boiler Anatomy
4 ton gas steam boiler
Gas Steam Boiler Guide: Gas Consumption Of 4 Ton Gas Steam Boiler

Gas Steam Boiler Guide: Gas Consumption Of 4 Ton Gas Steam Boiler

Gas consumption of 4 ton gas steam boiler, whose fuel consumption is one of the concerns of many customers. Then, how much is the fuel consumption of an ordinary natural gas steam boiler? How to calculate the gas consumption in a steam boiler?What is the gas consumption of a 4 ton gas steam boiler? And is directly related to the input cost. I will tell you about it in this paper.

TABLE OF CONTENTS

  1. How to calculate gas steam boiler gas consumption?

  2. Determine the output of the boiler.

  3. Determine the calorific value of the fuel.

  4. Calculation formula of fuel consumption.

  5. Conclusion

 

 

The gas consumption of gas-fired steam boilers is closely related to the stoker’s stoker experience. Not only the gas consumption, but also the safe operation of the boiler is very important. Therefore, the relevant state departments stipulate that the stoker must have a stoker certificate. Which is a manifestation of being responsible to the user unit, the stoker and the society.

In simple terms, the determining factors of the gas consumption of the boiler are: the heating area of ​​the boiler. The calorific value of the fuel, the purity of the fuel, the heating area of ​​the boiler convection, the radiation heating area of ​​the boiler, and the stoker skill of the stoker.

How to calculate gas steam boiler gas consumption?

The fuel consumption of natural gas steam boilers is one of the concerns of many customers. Then, how much is the fuel consumption of an ordinary natural gas steam boiler? We can calculate gas consumption in accordance with the following parameters: The heating value of natural gas is 35.53MJ / m³, which is calculated by the standard calorific value 0.845m³ / m³.

The best rated 4 ton steam boiler manufactured by Fangkuai is a high efficiency industrial steam boiler adopting double buttons quick-loading structure that can reduce overall dimensions and weight as well as simplify installation work. Compared with the traditional single button quick loading structure, its overall dimensions decreased 10% and weight decreased 15%. The special designed combustion chamber has double buttons for quick loading, which improves the thermal efficiency of the furnace and increases the power output.

Determine the output of the boiler.

The output of a ton of boilers is 600,000 kcal, and so on, the output of a 4-ton gas boiler is 2.4 million kcal.

Determine the calorific value of the fuel.

The calorific value of general natural gas is 8400 kcal per cubic meter, and the calorific value of diesel is 10240 kcal per kilogram.

 

4 ton gas steam boiler

Calculation formula of fuel consumption.

Thermal efficiency is determined by the heating area of ​​the boiler.

Fuel consumption = boiler output ÷ fuel calorific value ÷ boiler thermal efficiency.

  • The best rated 4 ton steam boiler manufactured by Fangkuai is a high efficiency industrial steam boiler adopting double buttons quick-loading structure that can reduce overall dimensions and weight as well as simplify installation work. The 4 ton gas fired steam boiler consumes 4 ton gas per hour, so you need to prepare the same amount of natural gas for operation.

  • If the boiler is equipped with advanced technology, it will be easy to use and maintain it.

Conclusion

In general, the fuel consumption of a 4 ton gas steam boiler is about 101 cubic meters. When it comes to the application industry of 4 ton steam boilers, many customers pay more attention to their own operating costs.According to the above introduction. Users can calculate the fuel consumption of the boiler according to the specific parameters of the gas-fired steam boiler. So as to understand the operating cost of the boiler. If you need to know more about the gas consumption of a 4 ton gas steam boiler, please contact us in time: +0086 186-2391-5479.

case5
Steam Boilers Guide: Dealer 8t Gas Fired Steam Boiler Armenia

Steam Boilers Guide: Dealer 8t Gas Fired Steam Boiler Armenia

Generally, the fuels that can be used fo 8t gas fired steam boiler are natural gas, liquefied gas, petroleum, light oil, heavy oil, etc. Gas steam boilers are commonly used in industrial industries such as wood, metal, automobiles, construction, cement, and electric power.

Fangkuai WNS series horizontal internal combustion furnace is a shell-type horizontal three-pass oil(gas) boiler developed by our company. Absorb advanced technology and experience at home and abroad. It will run automatically. After the burner atomizes the fuel, the produced torch fills the inner wall of the wave boiler, and transmits radiant heat through the inner wall. This is the first return. The high-temperature flue gas generated during combustion accumulates in the combustion chamber and turns to the secondary return (screw smoke tube bundle area).

Advantages of Fangkuai WNS series 8t gas fired steam boiler furnace

8t gas fired steam boiler

1、After the boiler is qualified, it can leave the factory as a whole, which is convenient for installation, debugging and use.

2、It runs automatically. The combustion, water level, temperature and steam pressure are automatically adjusted and protected.

3、Movable front and rear smoke boxes are convenient for boiler repair and maintenance.

4、The world-class burners ensure thermal efficiency and improve overall quality.

5、Sufficient steam storage room and heating surface enable the boiler to produce high-power and high-quality steam.

6、The overall design of the water-cooling chamber improves the thermal efficiency and prolongs the service life of the boiler.

7、Various high-quality boiler accessories to ensure the normal operation of the boiler.

8、The wave-shaped furnace and large combustion chamber make it have good thermal elasticity.

case7
Steam Boilers Guide: 8t Biomass Steam Boiler Price

Steam Boilers Guide: 8t Biomass Steam Boiler Price

8t Biomass Steam Boiler Price between $100000-$300000.Biomass steam boiler can be used to produce electricity on a small scale and is considered as one of the best renewable energy options. Biomass steam boilers are often used in industries where steam is needed but electricity supply is not available. These boilers are efficient in converting energy into heat and are considered as the best renewable energy source for power generation because of their high efficiency level, low cost and long term operating costs.

 

8t Biomass Steam Boiler Price

What is biomass steam boiler?

Biomass steam boilers are a type of boiler that uses wood, wood pellets, and other materials as the fuel source. These boilers can be used to heat your home or business if you don’t have access to natural gas or propane.

Biomass boilers use a process called pulverized fuel-fired combustion. This means that instead of burning large pieces of wood in an open fire, they use small particles made from compressed sawdust. When these particles are burned with oxygen inside the boiler’s firebox at temperatures over 1,000 degrees Fahrenheit (Celsius), they release gases including carbon monoxide and hydrogen while producing steam. This process is very similar to coal-fired systems except that biomass is not ash but instead has been ground up into small pieces called “pulverized”.

How efficient are biomass steam boilers?

This is a common question, because most people are unfamiliar with biomass boilers. They think that it’s similar to other types of boilers and will not be as efficient. But the truth is that biomass boilers are more efficient than other types of boilers by a long shot!

So what exactly makes them so great? Well for starters, biomass boilers don’t have many moving parts like gas or oil fired burners do. This means they’re easier to maintain and less likely to break down during operation. They also require much less maintenance than traditional coal-fired boilers because there’s no ash produced by burning wood pellets which has been reduced down into its basic components over time through combustion (i.e., carbon dioxide).

Instead, all that’s left behind after using wood pellet fuel is water vapor which rises up through exhaust pipes where it can escape safely from indoors without any risk of being harmful to others nearby or yourself if you were standing next door without proper ventilation equipment installed properly before installing such systems inside your home!

How much does it cost to install a biomass steam boiler?

The cost of a biomass boiler will depend on several factors, including the size of your heating system and the type of fuel source that you choose. The larger your heating system is, the more expensive it will be to install. Wood pellet boilers are cheaper than wood-burning boilers because they produce less ash and therefore require less maintenance or replacement parts.

Low price of biomass steam boilers.

Biomass boilers are a type of boiler used to produce steam by burning biomass fuel. Biomass boilers are generally used to heat buildings, but they can also be used to produce steam for industrial processes.

Biomass boilers are a cost-effective way to heat your home or business because they use waste materials that would otherwise go unused and convert them into useful energy. Biomasses include wood chips and pellets, agricultural residues such as straw and husks, industrial wastes like paper mill sludge (pulp), municipal solid waste (MSW), sewage sludge and animal manure.

Conclusion

Biomass boilers offer a great opportunity to reduce energy costs while reducing your carbon footprint. Biomass is the most abundant natural resource on earth, and it can be used to generate power and heat in all kinds of ways. If you are looking for an environmentally friendly alternative to fossil fuels then biomass boilers might just be what you need!

 

Click to get a quote!