Печь против котла | Все, что вам нужно знать

Введение

И печь, и котел могут обеспечить отопление и горячую воду для вашего дома.. В этой статье, мы подробно познакомим вас, в чем разница между ними, и помочь вам принять правильное решение при их выборе.

Как работать.

И котел, и печь можно использовать для обогрева дома., но они работают по другому. Бойлер нагревает воду напрямую, используя электричество или топливо (как природный газ), который затем передает тепло в ваш дом через радиаторы или конвекторы. С другой стороны, furnaces use electric elements in their burners to generate an air stream that circulates throughout your house via ductwork.

Heat Difference.

In both cases, heat is produced by burning fuel. But there are some differences in how they work. A furnace is a closed system that uses air to burn coal or oil, whereas a boiler uses steam (water heated to its boiling point).

A boiler can produce more heat than a furnace because it’s an open system — the heated water goes into pipes that circulate through the home and provide warmth throughout it. Boilers also use less fuel than furnaces because they’re more efficient at producing hot water than системы отопления are at producing warm air throughout your house.

Efficiency Comparison.

A boiler is more efficient than a furnace. Boilers typically have an efficiency of around 90%, while furnaces are only around 65%. This means that boilers use less fuel than furnaces, которые могут сэкономить вам деньги на счетах за электроэнергию и помочь уменьшить углеродный след.

Плюсы & Мосты.

Плюсы печей:

• Менее дорогая установка.
• Более эффективен при быстром обогреве больших помещений.
• Воздушные фильтры могут быть легко проверены или заменены домовладельцами..

Минусы печей:

• Распределение воздуха может привести к неравномерному нагреву.
• Требуется регулярное техническое обслуживание воздушного фильтра.
• Потенциально более высокие затраты на энергию, особенно если система имеет неправильный размер или не обслуживается.

Плюсы котлов:

• Высокая энергоэффективность.
• More even and comfortable heat distribution.
• Lower risk of indoor air quality issues as they don’t blow air around the house.

Cons of Boilers:

• Higher upfront installation costs.
• Requires professional expertise for installation and maintenance.
• Slower heating response compared to furnaces.

Life expectancy.

When it comes to lifespan, boilers have the upper hand. A boiler can last up to 30 годы while a furnace can last up to 20 годы. This is because boilers are more durable and require less maintenance than furnaces.

Приложение.

Furnaces are used to heat homes, предприятия, and other buildings. They use electricity or gas to heat air that is forced into the home by fans. Furnaces can be either vented or non-vented (also called sealed combustion). Vented furnaces have an exterior venting system that allows them to release combustion gases through the roof of your house. Sealed combustion furnaces do not require an exterior venting system because they don’t produce any combustion gases outside of your home.

Boilers provide hot water for household needs such as bathing and washing dishes by heating water using wood or coal. These include apartments and tiny houses. Examples include apartments and small houses in rural areas, which cost less to heat than larger homes. Because of their smaller area, they operate more efficiently.

Сравнение технического обслуживания.

В целом, boilers require more maintenance than furnaces. This is because boilers are more complicated machines that operate at higher temperatures and pressures than furnaces do. As such, they’re also more likely to break down due to wear and tear or an interruption in operation. В среднем, boilers require about $100 в год in maintenance costs (including parts and labor).

If you need your boiler repaired or serviced regularly (more than once per year), then this will add up over time as well–and it’ll be more expensive than just having your furnace serviced every year or two by comparison!

Монтаж.

When it comes to the installation of furnaces and boilers, it is important to note that both systems require professional expertise for proper installation. Однако, there are some differences in the installation process.

Furnace installation typically involves the following steps:

1. Sizing: A professional HVAC technician will assess the heating needs of your home to determine the appropriate size of the furnace.
2. Ductwork: If your home already has ductwork, the technician will inspect and possibly modify it to ensure proper airflow.
3. Venting: For gas or propane furnaces, proper venting to the outdoors is necessary for the safe release of combustion gases.
4. Electrical connections: The furnace will need to be connected to the electrical system of your home.
5. Thermostat installation: The thermostat, which controls the furnace, will be installed and wired.

Boiler installation, с другой стороны, involves slightly different steps:

1. Sizing: Similar to furnaces, boilers need to be appropriately sized to meet the heating requirements of your home.
2. Piping: A professional plumber or HVAC technician will install the necessary piping to connect the boiler to the heating system (радиаторы, baseboards, or radiant floor system).
3. Venting: Boilers typically require separate venting, such as a chimney or a vent pipe, to release combustion gases safely.
4. Fuel source connection: The boiler will need to be connected to the appropriate fuel source, such as a gas line or oil tank.
5. Controls and wiring: Similar to furnaces, boilers require thermostat installation and proper wiring for control.

In both cases, профессиональная установка имеет решающее значение для обеспечения безопасной и эффективной работы. Рекомендуется нанять квалифицированного специалиста по системам вентиляции и кондиционирования или сантехника, имеющего опыт работы с конкретной системой, которую вы выберете..

Ежемесячная стоимость.

The ежемесячная стоимость котла или печь зависит от нескольких факторов, включая размер устройства и то, какое топливо оно использует. Чем крупнее ваша система отопления, тем дороже будет эксплуатация с точки зрения энергопотребления. Например, a 50-gallon hot water tank that uses propane gas would be far less expensive than one with an 80-gallon capacity that runs on electricity (and vice versa).

How to choose.

The boiler and furnace both provide you with great service at home. Однако, there are some things you should know before choosing one over another:

1. Your needs. If you’re buying a new home, consider the energy efficiency of your future home and its heating system. If you’re planning on renovating an existing house with an old furnace or boiler, make sure it will be easy to install in your home’s current configuration.
2. Your space size. If you live in an apartment or condo and don’t have much room then a boiler may be better suited because they tend to be smaller than furnaces so they won’t take up too much space on your property!
3. Price. Get the best price for both products by comparing offers from multiple providers and checking reviews online before making any purchases!

Вывод

When it comes to choosing the best heating system for your home, there is a lot to consider. The two most common types of heaters are boilers and furnaces, но у каждого свои плюсы и минусы. Если вы хотите узнать о подробных параметрах и ценах печи и котла, пожалуйста, свяжитесь с нами в +0086 186-2391-5479.

О Дабонне

Плечи Dabont Energy Co., ООО.

У нас больше, чем 20 Многолетний опыт работы в области исследований и разработки оборудования для котла и разработки и производства. И привержены проектированию и производству котлов, которые соответствуют вашим потребностям, в том числе пожарная трубка, водопроводная труба, и паровые котлы, в то время как в будущем с последним технологическим котлом.